Applications
Atomic energy
Medical care
Petroleum
Natural gas
Scientific research
Characteristics
Low attenuation and low dispersion, meeting the operating requirements of communication window
Excellent protection properties and excellent strip force stability of the coating
Accurate geometrical parameters, ensuring low splicing loss and high splicing efficiency
Low radiation induced attenuation
Product Process
YOFC optical fibres are manufactured using the PCVD process. Due to a special glass composition and post-treatment process, these optical fibres exhibit excellent radiation resistance at the 1,310nm and 1,550nm operating wavelengths. The radiation resistant single-mode fibre manufactured using the PCVD process features a precise refractive index profile, ensuring excellent geometric, attenuation, and dispersion characteristics of the optical fibre.
Specifications
| Fibre type | Wavelength (nm) | Condition | RD1310 G2 (HT) | RD SM-G3 | RD SM-G3(YH) | RD SM-G3(HD) |
|---|---|---|---|---|---|---|
| Part No. | - | - | RD1311-D | RD1012-A | RD1012-B | RD1012-C |
| Optical properties | ||||||
| Attenuation (dB/km) | 1310 | - | ≤0.45 | ≤0.4 | ≤0.4 | ≤0.4 |
| 1550 | - | ≤0.53 | ≤0.3 | ≤0.3 | ≤0.3 | |
| Zero dispersion wavelength (nm) | - | - | 1287~1337 | 1303~1324 | 1303~1324 | 1303~1324 |
| Zero dispersion slope (ps/nm²·km) | - | - | ≤0.1 | ≤0.091 | ≤0.091 | ≤0.091 |
| Maximum value of single fibre (ps/km) | - | - | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 |
| Fibre link design value | - | - | ≤0.2 | ≤0.2 | ≤0.2 | ≤0.2 |
| Cable cut-off wavelength (nm) | - | - | ≤1290 | ≤1290 | ≤1260 | ≤1260 |
| Mode field diameter (μm) | 1310 | - | 7.5~9.5 | 8.6~9.6 | 8.6~9.5 | 8.6~9.5 |
| 1550 | - | 8.0~10.0 | 9.6~10.9 | 9.9~10.9 | 9.6~10.9 | |
| Geometrical properties | ||||||
| Cladding diameter (μm) | - | - | 125.0±1.0 | 125.0±1.0 | 124.5±0.4 | 125.0±1.0 |
| Cladding non-circularity (%) | - | - | ≤0.7 | ≤1.0 | ≤1.0 | ≤1.0 |
| Coating diameter (μm) | - | - | 245.0±10.0 | 245.0±10.0 | 245.0±5.0 | 245.0±10.0 |
| Core/cladding concentricity error (μm) | - | - | ≤12.0 | ≤12.0 | ≤8.0 | ≤12.0 |
| Coating non-circularity (%) | - | - | ≤6.0 | ≤6.0 | ≤6.0 | ≤6.0 |
| Coating non-circularity error (μm) | ≤0.6 | ≤1.0 | ≤0.6 | ≤1.0 | ||
| Curl (radial) | - | - | ≥2.0 | ≥2.0 | ≥2.0 | ≥2.0 |
| Environmental properties | ||||||
| Temperature-humidity cycling induced attenuation (dB/km) | 1310, 1550 | -10℃~85℃, 89%RH | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 |
| Temperature dependence induced attenuation (dB/km) | 65℃~85℃ | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 | |
| Water soak/dependence induced attenuation (dB/km) | - | 23℃, 30 days | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 |
| Damp heat dependence induced attenuation (dB/km) | - | 85℃, 89%RH, 30 days | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 |
| Dry heat aging (dB/km) | - | 85℃, 30 days | ≤0.1 | ≤0.1 | ≤0.1 | ≤0.1 |
| Temperature shock test (dB/km) | - | -70℃~125℃, 30℃/min, 5 cycles | - | - | ≤0.3 | - |
| Storage temperature test (dB/km) | - | 120 hours at 70℃ 120 hours at 125℃ | - | - | ≤0.3 | - |
| Temperature cycle test (dB/km) | - | -70°C~+125°C, 2~5°C/min, 5 cycles | - | - | ≤0.3 | - |
| Macro-bending performance | ||||||
| Bending radius | - | Number of turns | - | - | - | - |
| 30mm | 1310 | 100 | - | ≤0.1 | ≤0.1 | ≤0.1 |
| 1550 | - | ≤0.5 | ≤0.5 | ≤0.5 | ||
| Mechanical performance | ||||||
| Proof test level(kpsi) | - | Off-line | ≥100 | ≥100 | ≥100 | ≥100 |
| Coating strip force (N) | - | Average value | 1.0~5.0 | 1.0~5.0 | 1.0~5.0 | 1.0~5.0 |
| - | Peak value | 1.3~8.9 | 1.3~8.9 | 1.3~8.9 | 1.3~8.9 | |
| Dynamic fatigue parameter (n) | - | - | ≥20 | ≥20 | ≥20 | ≥20 |
| Radiation resistance | ||||||
| Test according to TIA/EIA 455-64(Db/100m） | 1310 | Induced attenuation under continuous radiation conditions with a total dose of 50 Krad and a dose rate of 0.1 rad/s (at 25°C) | - | ≤0.3 | ≤0.3 | ≤0.3 |
| 1310, 1550 | Induced attenuation under continuous radiation conditions with a total dose of 2000 Gy and a dose rate of 0.5 Gy/s (at 25°C) | ≤0.9 | ≤0.8 | ≤0.8 | ≤0.5 | |
| 1310 | Induced attenuation under continuous radiation conditions with a total dose of 200000 Gy and a dose rate of 0.5 Gy/s (at 25°C) | ≤2.0 | ≤1.5 | ≤1.5 | ≤1.0 | |
| 1550 | ≤2.5 | ≤2.0 | ≤2.0 | ≤1.5 | ||
| 1310 | Induced attenuation under continuous radiation conditions with a total dose of 1 MGy and a dose rate of 1.25 Gy/s (at 25°C) | - | - | - | -1.2 | |
| 1550 | - | - | - | -1.8 | ||